Lab Tools
Portable RF Capture and Playback, ATSC 3.0 Generation for the Lab
Portable RF generation, capture and playback for the lab bench and the field. Two compact USB instruments that turn a PC into a broadcast test station.
LabMod creates ATSC 3.0 signals from scratch; RF Catcher records and replays the real RF environment. Generate a signal, or capture a real one and play it back as often as needed. Both work with a standard Windows PC.



ATSC 3.0 LabMod
A compact, portable ATSC 3.0 modulator that generates live RF signals or IQ pattern files covering the full standard, including LDM. It is the first STL Gateway-compliant ATSC 3.0 modulator for lab use, and has been tested at ATSC 3.0 PlugFests.
Key specifications

RF Catcher
A compact RF capture and playback device and spectrum analyzer. Record real-world radio, TV, cellular and Wi-Fi signals as IQ files, then replay them in the lab as often as needed.



Key specifications
Which tool for which job?
| ATSC 3.0 LabMod | RF Catcher | |
|---|---|---|
| Main purpose | Generate ATSC 3.0 signals | Capture, play back and analyze RF |
| Standards | ATSC 3.0, including LDM | FM, DAB, ATSC, DVB, ISDB-T, cellular, Wi-Fi |
| Frequency range | 70 MHz to 6 GHz | 70 MHz to 6 GHz |
| Recording | Optional | Up to 55 MHz real-time |
| Positioning | – | Internal GPS/GLONASS |
| Form factor | ~600 g, USB 3.0, self-powered | ~600 g, USB 3.0, self-powered |
Better together
Capture real signals or generate new ones, then play them back on the bench.

Capture
Record real signals in the field with RF Catcher, geolocated with GPS/GLONASS if needed.
Generate
Build reproducible ATSC 3.0 test signals with LabMod, from PRBS, IP STL or TS inputs.
Replay
Play signals back on the bench to validate chipsets, receivers and set-top boxes. RF Catcher also offers an ATSC 3.0 LabMod activation option.
70 MHz – 6 GHz
USB 3.0
~600 g, USB-powered
RF capture and playback: frequently asked questions
What is RF capture and playback?
RF capture and playback means recording a real radio signal as IQ samples, then replaying it as often as needed on the bench. RF Catcher records and plays back signals from 70 MHz to 6 GHz, with up to 55 MHz of real-time bandwidth, and stores them as non-proprietary IQ files.
What does ATSC 3.0 LabMod add to RF capture and playback?
ATSC 3.0 LabMod is a compact ATSC 3.0 modulator for the lab. It generates live RF signals or IQ pattern files covering the full ATSC 3.0 standard, including LDM, from PRBS, IP STL or TS inputs. It is the first STL Gateway-compliant ATSC 3.0 modulator for lab use and has been tested at ATSC 3.0 PlugFests.
Which signals can RF capture and playback with RF Catcher cover?
FM, DAB, ATSC 3.0 and 1.0, DVB-T/T2, DVB-C/C2, DVB-S/S2 (with the integrated LNB controller), ISDB-T, cellular and Wi-Fi.
Do I need a PC for RF capture and playback?
Yes. Both instruments weigh about 600 g, are self-powered over USB 3.0 and are driven by a Windows PC running the RF-Catcher or LabMod software.
Can RF capture and playback work together with LabMod generation?
Yes. Record real signals with RF Catcher, generate reproducible ATSC 3.0 signals with LabMod, then play both back on the bench. RF Catcher also offers an ATSC 3.0 LabMod activation option, and LabMod offers optional RF recording.
What are typical uses of RF capture and playback?
R&D, factory tests and measurements, chipset development, TV and set-top box development, receiver validation, demonstrations and roadshows.
Equip your lab
Talk to the ENENSYS team about the right configuration and options for your test environment.