EdgeProbe
Broadcast Network Monitoring Probe
24/7 monitoring of broadcast networks, from RF to baseband. Up to 4 parallel monitoring modules in a single 1RU unit, combining two RF standards at once.
EdgeProbe monitors satellite distribution and terrestrial RF (terrestrial, cable, DAB) in one device. It is standalone, simple to configure, fast to deploy and compatible with any network monitoring system.

Up to 4 per 1RU
2 in one unit
25 W
One broadcast network monitoring probe, every standard
Each RF input is measured and decoded for its standard, with up to 2 RF inputs per 1RU.
DVB-T / T2
Level, MER, SNR, BER, modulation parameters (L1 signaling, TPS) and channel impulse response. T2 versions 1.1.1, 1.2.1, 1.3.1 and T2 Lite.
DVB-S / S2 / S2X
Level, CNR, Eb/N0, link margin, BER. Multistream, LNB powering and configuration, L-band (950–2150 MHz), C, Ku and Ka bands.
ISDB-T / Tb
Level, MER, SNR, BER per Layer A/B/C, TMCC and layer parameters, channel impulse response.
DVB-C / C2
Level, MER and BER, modulation parameters and L1 part 2 signaling for C2.
ATSC 1.0 / 3.0
RF spectrum and shoulders, level, SNR, MER, BER with LDPC iterations. TX ID decoding, STLTP link monitoring and Lighthouse scenario decoding.
DAB / DAB+
Monitored in the same 1RU device, combined with another RF standard.
Where the EdgeProbe broadcast network monitoring probe fits
One probe watches RF and baseband inputs, and reports to your supervision tools.


Supervise every site
EdgeProbe works with any network monitoring system, and stays reachable from remote sites.
Beyond RF measurements
Applications
Benefits
Detect degradations early, reduce site maintenance costs and plan network improvements, with remote access over GPRS/3G/4G.

EdgeProbe Nano
DVB-C/C2
ISDB-T/Tb
DVB-T/T2

EdgeProbe RF
DVB-C/C2
ISDB-T/Tb
DVB-T/T2

EdgeProbe Advanced
DVB-C/C2, ISDB-T/Tb
DVB-T/T2 · DVB-S/S2 · ATSC 1.0/3.0 · DAB+
Key specifications

Broadcast network monitoring probe: frequently asked questions
What is EdgeProbe, a broadcast network monitoring probe?
EdgeProbe is a broadcast network monitoring probe. It measures the RF signals and baseband links of digital TV and radio networks, and fits up to 4 parallel monitoring modules (2 per RF standard) in a single 1RU unit, combining two RF standards.
Which standards does the broadcast network monitoring probe cover?
DVB-T/T2, DVB-S/S2/S2X, DVB-C/C2, ISDB-T/Tb, ATSC 1.0/3.0 and DAB/DAB+. Baseband TS, T2-MI and BTS links are monitored through ASI and IP inputs, up to 4 per 1RU.
Which measurements does this broadcast network monitoring probe provide?
Level, MER, SNR and BER, channel impulse response, modulation parameters, SFN synchronisation (RF frame delay and drift, carrier frequency offset) and complete MPEG-2 TS monitoring following ETSI TR 101 290 priorities 1 to 3.
How does the broadcast network monitoring probe connect to my supervision system?
It works with any network monitoring system through SNMP v2c and v2c INFORM. Its web GUI works over low-bandwidth links (3G, GPRS, 4G). Alarm logs and RF trends are kept up to 6 months on 32 GB of internal storage.
Which versions of the broadcast network monitoring probe are available?
EdgeProbe Nano (compact), EdgeProbe RF (base RF monitoring) and EdgeProbe Advanced (full-featured, multi-standard). Options: internal GNSS receiver for SFN synchronisation, and dual power supply.
How much power does the broadcast network monitoring probe use?
25 W.
Monitor your network with confidence
Talk to the ENENSYS team about the right EdgeProbe configuration for your sites.