Twister DAB
High-End DAB/DMB Modulator/Exciter
TWISTER DAB is the last generation of 1U Rack modulator/exciter, fully compliant to DAB & DMB standard, targeting Radio transmitter designs, update of existing DAB transmitters or upgrade of VHF transmitters.
Highlights
Straightforward integration within transmitter
TWISTER has been designed to be easily integrated into an existing transmitter thanks to features dedicated to transmitter control such as AGC, power measurements (including reflected power protection mechanisms), adaptive precorrections...
Transmitter Optimization
TWISTER DAB Digital Adaptive Precorrection circuits permits to run transmitters very closed to their saturation limit, with unequalled RF signal performances and allows significant gain in transmitter Power Efficiency.
Ready-to-drive Power Amplifier
Thanks to RF input dedicated to power measurement, TWISTER DAB ensure a perfect stability of the transmitter output power.
Reflected Power Protection
TWISTER DAB integrates advance processes to protect the transmitter against reflected power.
Applications
- Straightforward integration within transmitter
- Transmitter update to new technology
- Upgrade/recycle of existing transmitters
- Maintenance of obsolete transmitters
Other Benefits
- Support MFN and SFN operation
- ETI Inputs & EDI inputs
- Input Seamless switching
- RF output up to +14dBm
Technical specifications
Data I/O
ETI Interface
2 G703 input - BNC - 75 Ω
- NI(G703), NA5376(G704), NA5592(G704)
1 G703 output - BNC - 75 Ω
- NI or NA /G703
Ethernet port
2 Ethernet port 1GigE - RJ45
- Protocols: IP, RTP, UDP, IGMP (V2 & V3)
- VLAN ID (1 to 4094) - IEEE 802.1q
- EDI De-encapsulation (TS 102 693)
Data Processing
Input Features
Automatic NI/NA Detection
Input stream redundancy
Seamless Switching
Modulation & Standards
MFN/SFN DAB Mode I, II, III & IV
DAB Transmission: EN 300 401 v1.4.1
DMB Services: EN TS 102 428 v1.1.1
ETI Interface: ETSI ETS 300 799 v1.5.1,
EDI: ETSI TS 102 633
Digital Adaptive Precorrections
Linear DAP: Amplitude ±3 dB, Group Delay 0 to 500 ns
Non Linear DAP: Amplitude ± 6 dB, Phase ±180°
Crest Factor Reduction (PAPR) and Protection clipping
Green Adaptive Precorrection (GAP): option
RF Monitoring
In band SNR / MER
Shoulder level (left/right)
RF Inputs/Outputs
RF output
VHF Band III (170/240 MHz), 1Hz step
- +14 dBm / N - 50 Ω
RF Monitoring output
Copy of Main RF output
20 dB below / SMA - 50 Ω
RF Input Feedback
2 VHF input for DAP/GAP process
-15 dBm to -5 dBm / SMA - 50 Ω
2 VHF input for Power Measurement
-10 dBm to 0 dBm / SMA - 50 Ω
Control & Management
Control / Monitoring
2 Ethernet port 1GigE - RJ45
- Web GUI and SNMP
LCD Front Panel Display
2 x GPI and 4 x GPO for external switch and PA control"
Clock and Synchronization
10 MHz & 1 PPS input/output
GPS or GPS/GLONASS option
Power Amplifier Control
2 GPI / Sub-D9 (Dry Contact)
4 GPO / Sub-D9 (Dry Contact)
1+1 & N+1 Redundancy Management
Up to 8 embedded fully configurable profiles
Profile selection using GPI or IP protocol
Physical
Height x Width x Depth
Format - Weight
Power supply - Power consumption
Ordering codes
XTTR-TWD0-4423
DAB Modulator/Exciter
+14dBm VHF band III output
Digital Adaptive Precorrections (DAP)
GPS/Glonass Onboard