IPGuardV3
Hardware-based 1+1 smart switch for IP redundancy with power-loss bypass
IPGuardV3 enables 1+1 Automatic IP switching with a hardware bypass mechanism. Designed for IP architectures, it secures terrestrial head-ends and any IP transport network by switching between main & backup sources based on a set of configurable criteria, ensuring reliable IP transport and error-free streams to DVB-T/T2, ATSC and ISDB-Tb networks.
Highlights
Automatic IP Switch
Switches automatically between IP devices or networks, selecting the best stream on configurable criteria. Provides 1+1 redundancy for any TSoIP/IP source — encoders, multiplexers, DVB-T2 gateways, MIP inserters, servers — and any transport network, handling differential delays.
Seamless Switching
Seamless switch-over between two identical MPEG-2 TS, T2-MI, RTP or STL streams carried over redundant networks with different delays, aligning both paths before switching. Combined with ENENSYS gateways, it protects DVB-T/T2, ATSC 1.0, ATSC 3.0, TV 3.0 and ISDB-Tb networks.
Real Hardware Bypass
A real IP bypass mechanism guarantees 100% service availability on power outage: incoming streams keep flowing to the output even if the module loses power — hardware-level protection for mission-critical deployments.
High Density
Up to 6 TSoIP switches (or 6 RTP streams) per module, or up to 60 IP switches on IP conditions. With 6 modules in a single 1RU HDc chassis, that scales to 360 IP switches per rack unit.
Daisy-Chain Scalability
DaisyChain lets several IPGuardV3 modules be serialized to grow processing capacity, fitting applications that handle a high number of streams without adding rack space.
Multi-Standard & Video Agnostic
One switch for DVB, ATSC and ISDB networks, agnostic to MPEG-2, H.264 and HEVC. Transparent bridge mode keeps end-to-end device communication intact across the redundancy layer.
Applications
- Head-end & contribution redundancy: 1+1 protection of encoders, multiplexers and gateways delivering TSoIP/IP
- Terrestrial network protection: seamless gateway switch-over for DVB-T/T2, ATSC 1.0/3.0 and ISDB-Tb SFN feeds
- Disaster recovery / geo-redundant sites: multi-mode peering between IPGuardV3 units covers all failover scenarios — active/standby (site B takes over site A), dual-active (both sites broadcasting), or synchronized stream selection
- High-density IP monitoring & switching: up to 360 IP switches per 1RU for dense head-ends
- Playout & transmission continuity: main/backup path protection with power-loss bypass
- STL / T2-MI over IP links: seamless protection of studio-to-transmitter and gateway feeds
- IP network qualification: delay measurement between redundant transport paths
Other Benefits
- Zero black-out: power-loss bypass and error-free switching keep services on air during equipment or network failures
- Multi-standard & video agnostic: one switch for DVB, ATSC and ISDB, across MPEG-2, H.264 and HEVC
- High density & scalable: up to 60 switches per module, 360 per 1RU, with daisy-chain expansion
- High availability: peering synchronization between units plus hardware bypass for full resilience
- Fully transparent: bridge mode preserves end-to-end device communication across the redundancy layer
- Proven expertise: 15+ years of ENENSYS experience in reliable IP broadcast and IPTV
Technical specifications
Inputs
Control
1x Gigabit Ethernet (RJ45) for GUI/SNMP
Data
2x Gigabit Ethernet (RJ45) for input streams
Outputs
Data
2x mirrored Gigabit Ethernet (RJ45) for output streams
Availability
Bypass mechanism to always output streams in case of power outage
Featuring
Switching conditions
IP alarms (presence, bit rate,...)
ETR 290, MIP, and T2-MI alarms
Advanced TS alarms
SMPTE 2022-7
RTP packet loss
Network jitter
Scheduled monitoring
Network Delay Measurement
Automatic changeover
Up to 6 TS over IP switches
Up to 6 T2-MI over IP switches
Up to 6 STL over IP switches
Up to 60 IP streams switches
Seamless switch
Seamless switch-over between the same TS, T2-MI, STLTP
Seamless switch-over between identical RTP streams
SMPTE 2022-7 switching
Alignment of delayed streams
Switching modes
Automatic switch
Priority input
Manual switch
Least errors
UDP/IP stream management
Unicast/Multicast stream
RTP support
VLAN management
FEC management
SMPTE 2022-1 / Pro-MPEG CoP#3 conformity
FEC input correction (TSoIP)
FEC output generation (TSoIP)
Network transparent bridge
No MAC/IP addresses for data interfaces
IGMP Protocol supported
Network address translation
IP/port remapping of streams across network domains
Peering
Active/Standby: one unit takes over on failure of the other (site-level failover)
Dual-Active: both units broadcast simultaneously
Synchronized selection: units select the same streams for consistent output
Monitoring supervision
Real-time monitoring of incoming streams
Web-based GUI (HTML5)
Full SNMP v2 support
5-position MiniConnec with a 3.81mm pitch at the rear of the module
Physical
HDc Chassis
Height
Width
Depth
Format
Front Panel
Power supply
Control IP Port
Data IP Ports
Power consumption
Operating temperature
Automatic IP Redundancy - Typical Use-Cases
Ordering codes
IPGuardV3-Access XTNM-IG30-1300
Automatic TSoIP switch, up to 2 TSoIP streams with FEC or 60 IP streams / IP switching conditions (stream bit rate, presence) / ETR 290 Level 1, 2 & 3 conditions for TSoIP / 1+1 switch at port or stream level / Passive and advanced IP passthru / Near-seamless RTP operation mode / Peering master-slave
IPGuardV3-Performance XTNO-IG30-2000
All IPGuardV3-Access features / N+1 redundancy / Seamless TS / Seamless T2-MI / Seamless RTP (SMPTE 2022-7 support)
IPGuardV3-Ultimate XTNO-IG30-3000
All IPGuardV3-Performance features / Up to 6× TSoIP switches / Network Delay Measurement