T2Edge for HDc

Local T2 adapter

T2Edge for HDc is standard-based solution that enables the delivery of DVB-T2 regional or local services over SFN networks while saving operating OPEX by optimizing the distribution network bandwidth.

Applications

Local T2 adapter
  • DVB-T2 regionalisation
  • DVB-T2 ultra-local insertion
  • Regional Emergency Warning Services (rEWS)

Highlights

Deployed in the DVB-T2 world’s largest roll-out

In 2011, MULTICHOICE, the leading multichannel digital television operator across the African continent, has selected the T2Edge for the deployment of the world’s largest DVB-T2 network over Pan-African countries with a total bouquet of more than 50 different channels in various languages over 15 countries. Since then, it has been deployed by leading TV operators across Africa, Asia and Europe.

Regional content insertion using PLP substiution

The T2Edge is taking benefit from the multiple PLP technology to build the DVB-T2 regional multiplex at the DVB-T2 transmitter sites. Receiving national and regional T2MI streams composed of several PLPs, the T2Edge can substitute in the national T2-MI stream some PLPs from the regional PLPs to update with local content. The insertion is performed in a deterministic manner to enable SFN broadcasting

Regional content insertion using PLP aggregation

The PLP aggregation technology is an advanced and flexible regional content insertion solution that behaves as a PLP remultiplexer. It allows aggregating one or several PLPs between the national and regional T2-MI stream to build the regional multiplex. In some region, the T2Edge may aggregate 3 PLPs while in another regions, it will create a multiplex composed of 2 PLPs. In each region, the T2Edge guarantees the broadcasting over SFN networks.

Bandwidth optimization to reduce annual OPEX

The use of Multi-PLP architecture and PLP Substitution brings unmatched flexibility to the Network Operator and allowing a drastic reduction of the operational costs; all common TV content (national or international) being delivered only once to save the distribution network bandwidth.

Regional Emergency Warning Services (rEWS)

ENENSYS patented technology (rEWS) is a receiver-agnostic system providing video-based emergency warnings on a regional basis of dangerous weather events and natural disasters for DVB-T2 networks. T2Edge with rEWS allows normal programming to be interrupted to play out the emergency alert, replacing all the normal A/V transport stream components with the emergency alert A/V content.

High Density chassis

The T2Edge operates at the edge of the DTT network on the transmission sites where density and power saving is vital. The T2Edge can be embedded in the ENENSYS high density chassis to allow the generation of 6 different regional DTT multiplex. It can also be combined with TxEdge, ASIIPGuard or IPGuardV2 products

Key points

  • Regional DVB-T2 multiplex creation at the DTT transmitter using PLP substitution or PLP aggregation
  • Deterministic PLP multiplexer to enable SFN broadcasting
  • EWS solution interoperable with any receivers
  • Unmatched DVB-SI processing to update service information related to the local services
  • Statistical Multiplexing enabler for local content
  • Transmitter agnostic
  • Bypass mode to guarantee service availability in case of power outage
  • Cost-effective solution by integrating DVB-S/S2 satellite input

For more informations on

T2Edge for HDc

Technical Features

  • Regional DVB-T2 multiplex creation at the DTT transmitter site using PLP substitution or PLP aggregation
  • Deterministic PLP multiplexer to enable SFN broadcasting
  • EWS solution interoperable with any receivers
  • Unmatched DVB-SI processing to update service information related to the local services
  • Statistical Multiplexing enabler for local content
  • Transmitter agnostic
  • Bypass mode to guarantee service availability in case of power outage
  • Cost-effective solution by integrating DVB-S/S2 satellite input

Technical specifications

INPUTS

Control

1x Gigabit Ethernet (RJ45)
for GUI/SNMP

T2-MI

2x ASI inputs (BNC)
1x Gigabit Ethernet (RJ45) - Option for T2-MI over IP input streams
Up to 2x DVB-S/S2 inputs (F-type) with HDmSat-T2Edge (one active) - Option

OUTPUTS

T2-MI

2x mirrored ASI outputs (BNC)
1x Gigabit Ethernet (RJ45) - Option for T2-MI over IP output streams

Availability

Optional Bypass to always output incoming T2-MI over ASI

FEATURING

Standards

ETSI TS 102 773 V1.3.1
ETSI EN 302 755 V1.3.1

Local insertion

Insertion of regional or local services at PLP level using PLP substitution or PLP aggregation technology
Insertion of up to 3 different PLP
No duplication of national services
Jumbo T2MI (option) support to enable higher T2-MI bit rate

DVB-SI management

Update SI information to describe the new regional/local services
Update NIT, BAT, SDT, EIT tables

EWS

Insertion of live EWS message instead of all A/V programs
Regional EWS insertion (rEWS)

SFN compliant

Deterministic local TV insertion to enable SFN broadcasting
No external reference needed

Service availability

Bypass management to always deliver the main T2-MI stream in case of power failure

Monitoring and Supervision

In-band configuration and firmware update support (Option)
Easy-to-use web based GUI
User management
Full SNMPv2 support

Physical

Height

43 mm / 1.69 in.

Width

443,7 mm / 17.46 in.

Depth

322,8 mm / 12,70 in.

Format

1 RU, width 19”

Front Panel

LCD Display and controls

Power supply

100-240V 50/60Hz or 48V DC

Power consumption

20W/module

Front

Hdc front panel

Back

HDc back panel

Ordering codes

HDc-Multi-220V

High Density chassis with 220V input

HDc-Multi-48V

High Density chassis with 48V input

HDm-T2Edge

DVB-T2 local adapter with PLP substitution with 2x ASI in and 2x ASI out

HDmSat-T2Edge

DVB-T2 local adapter with PLP substitution with 2x ASI in and 2x ASI out and 2x DVB-S/S2 satellite inputs (Up to 32 APSK) - one active

Options

OptiPLP

Insertion with PLP aggregation

T2Edge-SIUpdate

Update SI information to match with new services

T2Edge-IP

Add 2x IP data ports (RJ45) to the module to support IP input/output - Hardware option using one more slot

T2Edge-IPc

Enabling IP input and output management from the chassis IP data ports (2x RJ45)

T2Edge-DTH

Upgrade to DTH-T2MI adapter

T2Edge-EWS

Regional EWS solution management to alert for immediate dangers

T2Edge-Bypass

Bypass to always output main input

T2Edge-DualSat

Activate second DVB-S/S2 input in HDmSat-T2Edge

T2Edge-JumboT2MI

Enable to support T2-MI at higher bit rate

T2Edge-InBand

In-band reception of configuration and firmware update

T2Edge-BISS

Allows BISS-1 descrambling

HDc-Multi-In220VRedundant

110V/220V redundant power supply

HDc-Multi-In48VRedundant

48V DC redundant power supply

For more informations on

T2Edge for HDc

For more informations on

T2Edge for HDc