SmartGate T

DVB-T SFN Adapter

SmartGate T is ENENSYS’ SFN adapter module for DVB-T that inserts MIP packet, performs bit rate adaptation and PCR restamping to enable Single Frequency Network broadcasting over DVB-T networks.

Highlights

SFN Management

The ENENSYS SFN Adapter provides synchronization (timestamp) information to all DVB-T transmitters to generate the same data at the very same time over the same frequency. It can also control individually each DVB-T transmitter to set remotely frequency offset or time offset information.

1+1 seamless redundancy - SFNguard

ENENSYS' patented technology, SFNguard, is the unique 1+1 redundancy mechanism that guarantees a seamless switch-over in SFN to avoid any TV black-out during change-over operation between 1+1 MIP inserter. Combined with ENENSYS seamless ASI switch, ASIIPGuard or the ENENSYS seamless IP switch, IPGuard, it offers a unique solution to maintain DVB-T transmission after MIP inserter change-over upon input failure or product maintenance.

T2 ready

The SmartGate T is running in a new generation platform to provide higher density, to operate with other ENENSYS module in the same chassis and to provide high reliability features with redundant power supplies. The product can migrate to a DVB-T2 Gateway (T2Gateway for HDc) without changing the hardware by only a firmware update.

Dense solution

Operating at the head-end after DVB multiplexer, the SmartGate T for HDc runs in the HDc chassis to embed up to 6x SmartGate T modules in 1U so that the same chassis can output up to 6 TS with MIP packets over ASI or IP.

MIP inserter with IP inputs/outputs

The SmartGate T receives at the input a MPEG-2 TS over ASI or IP, inserts MIP packet to synchronize all the DVB-T transmitters to broadcast the DVB-T. multiplex over Single Frequency Networks and performs bit rate adaptation and PCR restamping to match with DVB-T transmission parameters. It outputs the new MPEG-2 TS with MIP packet over ASI or IP. It can support redundant IP inputs and mirrored IP outputs.

Applications

  • DVB-T SFN broadcasting
  • MIP insertion according to ETSI EN 101 191
  • PCR restamping and bitrate adaptation
  • Redundant inputs and mirrored outputs over ASI or IP
  • Seamless 1+1 redundancy (patented technology SFNguard)

Other Benefits

  • Central body of the DVB-T network
  • Spectrum bandwidth optimization
  • Interoperability with transmitters
  • Avoid TV black-out during switch-over operation
  • Embedded in High Density chassis (HDc):
    • to allow up to 6x SmartGate T in 1U
    • to combine with ASIIPGuard, …
  • Upgradable to DVB-T2 Gateway
  • Straight integration into any NMS: full SNMP v2  compliant
  • Easy to setup and to monitor with intuitive GUI

Technical specifications

Input

Control

1x Gigabit Ethernet (RJ45) for GUI/SNMP (TCP/IP)

MPEG2-TS

188 or 204 bytes
2x ASI (BNC 75 Ω) inputs
2x Gigabit Ethernet (RJ45) for RTP/UDP/IP or UDP/IP input streams

GPS

1x PPS (BNC 50 Ω) input connected to an external GPS receiver
1x TNC for internal GPS connected to a GPS antenna - Option

Output

MPEG2-TS

2x mirrored ASI (BNC 75 Ω) outputs
2x Gigabit Ethernet (RJ45) for RTP/UDP/IP or UDP/IP output streams

Featuring

SFN Adaptation

MegaFrame Initalization Packet insertion according to TS 101 191
All optional functions: up to 128 transmitters at the same time for DVB-T

DVB modes

Full compliant with the standard (bandwidth, FFT, constellation, code rate)

TS processing

Bit rate adaption to DVB parameters
PCR restamping
MIP packet insertion
NIT update

T2 ready

Future-proof platform that can migrate to DVB-T2 Gateway (option)

Redundancy

SFNguard, patented 1+1 seamless
Redundant ASI or IP (option) inputs
Mirrored ASI and IP (option) outputs

SIP Insertion

Enable SIP insertion with SmartGateT-DTMB option

IP management

ProMPEG CoP#3/SMPTE 2022-1
2x Gigabit ports from the chassis

Monitoring and Supervision

Easy-to-use web GUI
Full SNMP v2 support

Physical

HDc Chassis

Height

43 mm / 1.69 in.

Width

443,7 mm / 17.46 in.

Depth

322,8 mm / 12,70 in.

Format

1 RU, width 19”

Front Panel

LCD Display and controls

Power supply

100-240V 50/60Hz or 48V DC

Control IP Port

1x Gigabit Ethernet (RJ45) control port

Data IP Ports

2x Gigabit Ethernet (RJ45) data port

GPS input

1x TNC for GPS/Glonass input

PPS input

1x PPS input

10MHz input

1x 10MHz input

Power consumption

20W/module

Operating temperature

0 to 50°C / 0 to 131°F with 3 modules - 0 to 45°C / 0 to 131°F with 6 modules

Front

Back

HDc back panel

Ordering codes

HDc-220VRedundant

High Density chassis with 2x 220V AC Power supplies

HDc-48VRedundant

High Density chassis with 2x 48V DC power supplies

HDm-SmartGate-T

MIP inserter module using 1 slot (hardware to be ordered with one HDc chassis) with:
- 2 x DVB-ASI inputs
- 2 x DVB-ASI outputs

Options

SFNGuard

1+1 seamless redundancy to avoid TV blackout during swich-over operation

SmartGateT-T2Gateway

Firmware upgrade to DVB-T2 Gateway

SmartGateT-DTMB

Enable SIP insertion

NN6-GPSv2

Internal GPS receiver option

For more informations on

SmartGate T